Red Hat ENTERPRISE LINUX WS 2.1 - Instalační příručka Strana 110

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 272
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 109
110 RED HAT Enterprise Linux WS 4
DONE
INDEX
INDEX
select Microsoft Intellimouse if you have a wheel mouse, otherwise the middle
button will not work correctly)
3. In the window Disk Partitioning Setup choose Manually partition with Disk
Druid
4. In the window Partitioning:
Bruker BioSpin recommends to create the following partitions on a 80GB hard-
disk. For all these partitions you should select the button: Force to be a primary
partition and as File System Typeext3
1
‘:
a) a partition /boot with 125MB size
b) a partition / with 16GB size
c) define the swap partition /swap with 4GB size by selecting swap as File
System Type
d) a partition /opt should use the remaining space (enable Fill to maximum
allowable size)
5. In the window Boot Loader Configuration accept the default Use GRUB as the
boot loader
6. In the window Network Configuration disable Active on Boot for eth1 if your
PC does not control a spectrometer (e.g. notebook or workstation).
If the PC is controlling a spectrometer you should select Active on Boot for eth1.
Additionally you can click on Edit of eth1 and configure it for spectrometer con-
trol. For this you can type in the IP address and subnet mask:
IP-address (eth1): 149.236.99.1
Subnet mask (eth1): 255.255.255.0
The hostname should be created by DHCP (if available). Changing the hostname
to another name can be done in the installed system, see chapter 10.2
7. In the window Firewall, select the firewall configuration you prefer.
If you select other than No Firewall and the installation is for spectrometer con-
trol, you have to enable your spectrometer communication for full access. Click
on eth1 in the section:
If you would like to allow traffic from a device, select it below
1. ext3 file system is a journaling filesystem. The advantage of a journaling filesystem is, that an
accidental power off would not end in most cases to a file system check and missing data.
!
Zobrazit stránku 109
1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 271 272

Komentáře k této Příručce

Žádné komentáře